Electrical

5133 ANL Fuse - 300AMPFeatures:Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boatsSilver-plated connector blades for corrosion resistanceVisible indication of blown condition6,000 Ampere Interrupt Capacity...

RJ12 UTP Cable - 10MA cable to connect the BMV shunt to the BMV head unit. An RJ12 cable ships standard with a BMV battery monitor, but if this cable is too long or too short it can be replaced by one of these cables, lengths available from 0.3 up to 30...

Seamless Butt Splice - 8 AWG - Non-Insulated - 10 PackButt splices are a simple way to repair or create a long-term electrical connection. They are easy to use and built for longevity. Seamless tinned butt splices are available in non-insulated only...

Dual Volt Meter Rock Switch 10V-48VDCThis digital dual-voltage meter monitors and displays the voltage for the main and auxiliary batteries simultaneously. Rocker switch styling means this voltmeter fits any standard 13/16 in. x 1-7/16 in. rocker switch...

Dual Buss Bar with Cover - 12 TerminalsThis dual bus bar is designed for DC positive or negative distribution on one block or AC neutral and safety ground collection on one block. Constructed of corrosion-resistant tin-plated Copper and ABS with a...

12-10 AWG Heat Shrink Butt Connector - 25 PackButt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to...

Tinned Lug 3/0 AWG - 5/16" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made...

Tinned Lug 3/0 AWG - 3/8" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made...

Tinned Lug 3/0 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made...

USB & USB-C Rocker Switch Style Power SocketThis USB & USB-C Rocker Switch Style Power Socket charges two devices simultaneously. Fits into any 13/16” x 1-7/16” rocker switch hole. The total output 4.8A load is split 2.4A per side as...

Heat Shrink Ring Terminal - #8 3/8" *25-PackAncor heat shrink connectors offer heat-activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water-tight seal and the ultimate vibration and strain relief...

Heat Shrink Ring Terminal - #8 1/4" *25-PackAncor heat shrink connectors offer heat-activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water-tight seal and the ultimate vibration and strain relief...