Sailing

Key Pin Shackle - Diameter 6mm - 1/4"Features:Key pin shackle forged in grade 316L stainless steelOpening and closing is done simply by rotating the pin half a turnNo risk to lose the pin as it remains attachedOutstanding working and breaking...

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.

20mm Lead RingLead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Size 5 54mm Plain Bearing Pulley Block Single Block Fixed EyeThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and...

T-Cleat Cam Cleat - Small - Red w/Grey Base2-8mm(3/32" - 5/16") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in...

F20 Splicing Needle w/Puller - Medium 4mm-6mm(5/32"-1/4") LineA range of specialised rope splicing needles for sailors and riggers.They are specifically designed for use with modern synthetic fibres and ropeconstructions, in particular small line sizes...

C-Cleat Cam Cleat - Small - Black w/Black Base2-8mm(3/32" - 5/16") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in...

Stanchion BullseyeBarton's Stanchion Mount Bullseye is ideal for use with furling lines in place of a block. The simple-to-fit mount features a large nylon bullseye with a 17 mm opening.

ClamSealThe ClamSeal™ can instantly repair splits and tears up to 3.5" (90mm) in length without using any hand tools or adhesives.ClamSeal™ is a glueless repair system that instantly repairs small tears or splits in inflatables above or...

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions...

25mm Single Block with V-JamThe 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and...

Black Watertight U-Bolt - 8mm Diameter - 5/16" - 80mm Length - 3-5/32"Features: Fully drop-forged product with high-quality stainless steelOutstanding working and breaking loadsComplete water-tightness thanks to the resistant rubber collar (black...