Sailing

Hasp & Staple 52mmThis hinge was fabricated from marine-grade 316 stainless steel and electro-polished for a long-lasting high finish. Features:The pins of the hinges and staple are welded in place for added securitySpecifications:Closed...

25mm Single Block with BecketThe 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and...

Stamped "D" Shackle - 1/4"Pin Dia. 1/4" (6 mm), Depth 1" (25 mm), Width 11/16" (17 mm), SWL 1750 lbs. (795 kg), Weight 1.1 oz. (31 g)

Safety Snap Hook - 50mmFeatures:Grade 316L forged snap hookVarious applications onboardOutstanding working and breaking loadsModern designApplications:Various uses on board: fastening applications

Key Pin Shackle - Diameter 5mm - 3/16"Features:Key pin shackle forged in grade 316L stainless steelOpening and closing is done simply by rotating the pin half a turnNo risk to lose the pin as it remains attachedOutstanding working and breaking...

Self-Locking Large Shackle - Diameter 5mm - 3/16"Features: Self-locking large shackle forged in grade 316L stainless steelThe pin is locked into one of the indentationsNo risks of loosening due to vibrationsOutstanding working and breaking...

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.

10mm Lead RingLead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

16mm Block with BecketThe 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg)...

Size 2 Single Cheek BlockPlain Bearing BlocksBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.SpecificationsSheave size: 35mm x 12mmMax rope...

Size 0 20mm Plain Bearing Pulley Block Double Fixed EyeThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range...

Size 2 Single Swivel BlockA strong, lightweight range of blocks for use on dinghies and dayboats or as lead blocks on larger craft. Size 2 - Single Swivel Block.