Rigging

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard...

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life...

Rigging Toggle - 3/8" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding...

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding...

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 7/16" & 1/2" - 2-PackWrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin...

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

High Load Eye 16mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing...

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 5/16" & 3/8" - 2-PackWrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin...